Motorola 3200 Especificações descarregar pdf (Página 68)

• Supplemental2 - Enables or disables this option. A check in the checkbox indicates that the option is enabled.

• Supplemental5 - Enables or disables this option. A check in the checkbox indicates that the option is enabled.

• Supplemental Mode

- No Supplementals - the scanner is presented with a UPC/EAN plus supplemental symbol, the scanner

decodes UPC/EAN and ignores the supplemental characters (default).

- Supplemental Always - the scanner only decodes UPC/EAN symbols with supplemental characters, and

ignores symbols without supplementals.

- Supplements Auto - the scanner decodes UPC/EAN symbols with supplemental characters immediately. If

the symbol does not have a supplemental, the scanner must decode the bar code the number of times set via

UPC/EAN Supplemental Redundancy before transmitting its data to confirm that there is no supplemental.

- Supplemental Smart - Enables smart supplementals. In this mode the decoder returns the decoded value of

the main block right away if it does not belong to one of the following supplemental types: 378, 379, 977, 978,

979, 414, 419, 434 or 439. If the bar code starts with one of the prefixes it searches the image more

aggressively for a supplemental. Tries to scan the supplemental if it is present. If the supplemental scanning

failed, then the main bar code is returned.

- Supplemental 378-379 - Enables (auto-discriminate) supplemental for UPC/EAN codes starting with 378 or

379. Disables reading of supplementals for any other UPC/EAN bar code not starting with 378 or 379. Tries to

scan the supplemental if it is present. If the supplemental scanning failed, then the main bar code is returned.

- Supplemental 978-979 - Enables (auto-discriminate) supplemental for UPC/EAN codes starting with 978 or

979. Disables reading of supplementals for another UPC/EAN bar code not starting with 978 or 979. Tries to

scan the supplemental if it is present. If the supplemental scanning failed, then the main bar code is returned.

- Supplemental 414-419-434-439 - Enables (auto-discriminate) supplemental for UPC/EAN codes starting with

414, 419, 434 or 439. Disables reading of supplementals for another UPC/EAN bar code 4 - 16 not starting

with 414, 419, 434 or 439. Tries to scan the supplemental if it is present. If the supplemental scanning failed,

then the main bar code is returned.

- Supplemental 977 - Enables (auto-discriminate) supplemental for UPC/EAN codes starting with 977.

Disables reading of supplementals for another UPC/EAN barcode not starting with 977. Tries to scan the

supplemental if it is present. If the supplemental scanning failed, then the main bar code is returned.

• Retry Count - Retry count for auto-discriminating for supplementals. Possible values are 2 to 20 inclusive. Note

that this flag is only considered if Supplemental Mode - UPC EAN is set to one of the following values:

Supplementals Auto, Supplementals Smart, Supplementals 378-379, Supplementals 978-979, Supplementals

977 or Supplementals 414-419-434-439 (2 to 20, default 10).

• Bookland - Enable or disable this option. A check in the checkbox indicates that the option is enabled.

• Coupon - Enables Coupon code decoding. Note that in order to successfully decode Coupon codes, all of the

correct decoders must be enabled. A check in the checkbox indicates that the option is enabled.

• Convert DataBar To UPC EAN - If this is set it converts DataBar bar codes to UPC/EAN format. For this

setting to work UPC/EAN symbologies must be enabled. A check in the checkbox indicates that the option is

enabled.

Reader Params

Allows the configuration of parameters specific to the selected bar code reader.

• Beam Timer - Sets the maximum amount of time that the reader remains on (0 - 60,000 ms in increments of 100

ms). A value of 0 sets the reader to stay on indefinitely (default -15000).

• Linear Security Level - Sets the number of times a bar code is read to confirm an accurate decode.

- Security Short or Codabar - Two times read redundancy if short bar code or Codabar.

- Security All Twice - Two times read redundancy for all bar codes (default).

- Security Long and Short - Two times read redundancy for long bar codes, three times for short bar codes.

- Security All Thrice - Three times read redundancy for all bar codes.

• Picklist - Allows the imager to decode only the bar code that is directly under the cross-hair/reticle (+) part of the

pattern. This feature is useful in applications where multiple bar codes may appear in the field of view during a

decode session and only one of them is targeted for decode.

68 | DataWedge Configuration

Send Feedback | June 2014 | MN000887A01

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 181 182

Comentários a estes Manuais

Sem comentários

Motorola 3200 Especificações Página 68

Comentários a estes Manuais

Manuais e produtos relacionados com Computadores de bolso Motorola 3200