Motorola LM2000 Guia de Instalação descarregar pdf (Página 55)

3: Conﬁguring the Boot Parameters using the Local Console

DC 900-1331F 55

Note

If Freeway has a local console attached that asserts modem control

signals such as powered up DEC VT-100 or powered up DEC

VT-220, LEDs 3 and 4 are green throughout the entire boot test.

Otherwise, the LEDs change color as described in the following

sections.

At the start of this test, LED 1 is green and LEDs 2, 3, and 4 are red. There are four stages

to this test during which the LEDs turn green in a left-to-right progression as follows:

1. At the end of stage 1, LED 1 is green and LEDs 2, 3, and 4 are red.

2. At the end of stage 2, LEDs 1 and 2 are green, and LEDs 3 and 4 are red.

3. At the end of stage 3, LEDs 1, 2, and 3 are green, and LED 4 is red.

4. At the end of stage 4, all four LEDs are green and Freeway is on-line.

Figure 3–3 shows the front panel LEDs and Table 3–3 describe the four test stages.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 85 86

Sem comentários

Motorola LM2000 Guia de Instalação Página 55