Motorola M12 Oncore Guia do Utilizador descarregar pdf (Página 182)

Chapter 5 - I/O Commands

12 CHANNEL SELF-TEST MESSAGE (@@Ia)

The M12+ receiver user has the ability to perform an extensive self-test. The tests that are

accomplished during the Self-Test are as follows:

• Antenna connection

• RTC communication and time

• Temperature sensor

• RAM

• FLASH ROM

• Correlator IC

The output of the self-test command is a 24-bit field, where each bit of the field

represents the Pass/Fail condition for each parameter tested. Passed tests are indicated by a

logic '0', while failed tests are indicated by a logic '1'.

When the self-test is initiated, the next output message may not be the response. The self-test

may take up to ten seconds to execute. Once the self-test is complete, the satellite acquisition

process starts restarts as when the receiver was first powered on. The date, time, position,

almanac and ephemeris information is all retained.

Motorola GPS Products - M12+ User's Guide Revision 6.X 09FEB05

174

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 221 222

Sem comentários

Motorola M12 Oncore Guia do Utilizador Página 182