Motorola AT Commands G24-L Informações Técnicas descarregar pdf (Página 394)

100

101

GPRS/EDGE

3-318 AT Commands Reference Manual January 31, 2007

Syntax

+MIPDATA: <Socket ID>,<Number of received data bytes>

The following table shows the MIPDATA parameters.

Example

+MIPDATA: 1,1372

MIPXOFF, Flow Control - Xoff

This command is the unsolicited response that the G24 sends to the terminal to stop sending data

when it does not have enough memory to process new +MIPSEND requests. The G24 uses the

accumulating buffer prior to pushing data into the protocol stack. This memory resource is

protected by a Xoff_upper watermark.

Event

+MIPXOFF: <Socket ID>

Example

+MIPXOFF: //The G24 detects that the accumulating buffer 1 has reached its Xoff

watermark.

From this point, the terminal is not allowed to send data, until it receives the +MIPXON

command.

MIPXON, Flow Control - Xon

This command is the unsolicited event that the G24 sends to the terminal when it detects that it

has free memory in the accumulating buffer and can process new +MIPSEND requests, after the

+MIPXOFF event.

Event

+MIPXON: <Socket ID>

Example

+MIPXON: 1 //The G24 pushed the data into the protocol stack on socket 1 and is

able to handle more data from the terminal.

Table 3-211: MIPDATA Parameters

<Parameter> Description

<Socket ID> Identification Number of Socket:

1,2,3,4

<number of received data bytes > Amount of data in bytes, received from Network, when

G24 is in pseudo-command mode.

1 2 ... 389 390 391 392 393 394 395 396 397 398 399 ... 521 522

Comentários a estes Manuais

Sem comentários

Motorola AT Commands G24-L Informações Técnicas Página 394

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Motorola AT Commands G24-L