Motorola VT2142 Guia do Utilizador

Quick Start GuideVonage®Device Motorola VT2142

You can solve many installation issues by resetting all of yourequipment:1. First, power down in this order: a. Computer, b. Router, if you have one,

9Power – When the power light stops blinking and is a solid green, this indicates that your Vonage Device has started up properly. Note that both the

• High-speed broadband Internet connection, such as Cable or DSL• A valid Vonage account• If you purchased your Vonage Device at a retail location, ma

1. If you purchased your Vonage®Device from a retail store, you must first activate your Vonage phone service. (You will need to provide the MAC ID on

Welcome1to the Quick Start Guide for Vonage®.Get ready to start saving money on your phone bill with Vonage – just follow these easy step-by-step inst

NOTE: Ensure you are using the power supply provided with theVonage Device. Using the wrong power supply could result in damageto your equipment.*Not

3Step 2:Set up your Vonage®Device1. Unplug your existing modem’s power cord. Leave your modem connected to your cable or DSL phone line that supplies

4. Connect one end of the blue cable to the Ethernet port on your modem. Connect the other end to the blue portlabeled “Internet” on the back of the V

6. Now plug your modem’s power cord back into an electrical power outlet. NOTE: You should allow enough time for your modem to complete its start-uppr

1. Unplug the modem for at least 60 seconds. If left off for less than 60 seconds, it might still “remember” old information that could prevent it fro

Connecting your phone1. Plug a standard telephone cord into your phone. NOTE: If not done so already, disconnect phone card from wall.2. Plug the othe