Motorola Netopia Embedded Software Especificações descarregar pdf (Página 286)

Administrator’s Handbook

286

Port Renumbering Settings

If you use NAT pinholes to forward HTTP or telnet trafﬁc through your Motorola Netopia® Gateway to an

internal host, you must change the port numbers the Motorola Netopia® Gateway uses for its own conﬁgu-

ration trafﬁc. For example, if you set up a NAT pinhole to forward network trafﬁc on Port 80 (HTTP) to

another host, you would have to tell the Motorola Netopia® Gateway to listen for conﬁguration connection

requests on a port number other than 80, such as 6080.

After you have changed the port numbers the Motorola Netopia® Gateway uses for its conﬁguration trafﬁc,

you must use those port numbers instead of the standard numbers when conﬁguring the Motorola Neto-

pia® Gateway. For example, if you move the router's Web service to port “6080” on a box with a system

(DNS) name of “superbox”, you would enter the URL http://superbox:6080 in a Web browser to open the

Motorola Netopia® Gateway graphical user interface. Similarly, you would have to conﬁgure your telnet

application to use the appropriate port when opening a conﬁguration connection to your Motorola Netopia®

Gateway.

set servers web-http [ 1 - 65534 ]

Speciﬁes the port number for HTTP (web) communication with the Motorola Netopia® Gateway. Because

port numbers in the range 0-1024 are used by other protocols, you should use numbers in the range 1025-

65534 when assigning new port numbers to the Motorola Netopia® Gateway web conﬁguration interface. A

setting of 0 (zero) will turn the server off.

set servers telnet-tcp [ 1 - 65534 ]

Speciﬁes the port number for telnet (CLI) communication with the Motorola Netopia® Gateway. Because

port numbers in the range 0-1024 are used by other protocols, you should use numbers in the range 1025-

65534 when assigning new port numbers to the Motorola Netopia® Gateway telnet conﬁguration interface.

A setting of 0 (zero) will turn the server off.

☛ NOTE:

You cannot specify a port setting of 0 (zero) for both the web and telnet ports at the same

time. This would prevent you from accessing the Gateway.

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 367 368

Sem comentários

Motorola Netopia Embedded Software Especificações Página 286