Motorola Smart Controller Manual do Utilizador descarregar pdf (Página 9)

WiNG 5.X How-To Guide – Smart RF

Page 9

1.3.3 Coverage Hole Recovery

Smart RF provides mitigation for coverage issues for Wi-Fi clients located at the fringes of the network or

in poor coverage areas. When coverage hole is detected, Smart RF first determines the power

compensation needed based on the signal to noise ratio (SNR) for a client as seen by the Smart RF

managed radio. If a client’s signal to noise value is above the threshold, the transmit power is increased

until the signal to noise rate falls below the threshold. Coverage Hole Recovery is enabled by default.

Figure 1.3.3 – Coverage Hole Recovery Example

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 50 51

Sem comentários

Motorola Smart Controller Manual do Utilizador Página 9