Motorola MICOM-2ES Especificações descarregar pdf (Página 34)

2-4.3 Installation of Transceiver in Carrying Harness

1. Place the carrying harness on a level surface, with the metal braces facing

upward.

2. Place the micomTrooper on the top of the carrying harness, with its front

panel upwards and its rear resting on the carrying harness (see figure).

Note position of audio connectors: they must be to the left.

3. Connect the three-pin D-type power connector of the power cable to the

micomTrooper power connector. Fasten securely the two connector

screws.

4. Connect the other connector of the power cable to the battery connector.

Fasten securely the connector screw.

2-8

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 55 56

Sem comentários

Motorola MICOM-2ES Especificações Página 34