Motorola T2282 Manual de Serviço descarregar pdf (Página 22)

of 48 European Customer Services

T2282

4.1 Disassembly Introduction

TheT2282 is held together by 6 screws, 2 uppermost and 4 within the battery casing. Ensure care is

taken when removing the LCD from the main PCB as the flex is very delicate and can be easily

damaged.

Ensure that a properly grounded high impedance conductive wrist strap is used whilst performing any

tasks during the disassembly and assembly of the unit

Avoid stressing the plastics in any way to avoid damage to either the plastics or internal components.

4.2 Recommended Tools

The following tools are recommended for use during the assembly / disassembly of the T2282

• Anti-static Mat Kit - 0180386A82, includes:

Antistatic mat 66-80387A95

Ground Cord 66-80334B36

Wrist Band 42-80385A59

• Plastic Bladed Tool SLN7223A

• T6 Torx Driver

4.3 Disassembly Procedure

The following set of diagrams will demonstrate the correct sequence and action required to disassemble

the T2282

The use of the exploded diagram on page 19 and 20 may be of some assistance for part recognition.

4.4 Assembly Procedure

Once the unit is disassembled and the repair is carried out, the unit must then be reassembled, this is

carried out in the exact reverse order as the disassembly.

!! CAUTION !!

Many of the intergrated devices used in this equipment are vulnerable to damage from

electro-static charges. Ensure that adequate static protection is in place when handling,

shipping and servicing the internal components of this equipment.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Sem comentários

Motorola T2282 Manual de Serviço Página 22