Motorola CP040 Guia do Utilizador descarregar pdf (Página 14)

English

GETTING STARTED

SENDING A CALL

RECEIVING A CALL

MONITORING

It is important to monitor traffic before transmitting to

ensure that you do not “talk over” someone who is

already transmitting.

1 Turn your radio on.

2 Use the Channel Selector knob to select the

desired channel.

3 Hold the radio in a vertical position, press the

PTT, and talk at a distance of about

2.5 to 5 cm from the microphone.

4 Release the PTT to listen.

1 Turn your radio on.

2 Adjust the radio’s volume.

3 Switch to the desired channel. To respond,

hold the radio in a vertical position, press the

PTT, and talk at a distance of about

2.5 to 5 cm from the microphone.

1 Press and hold the preprogrammed

Monitor button to access channel traffic.

2 Once channel traffic has cleared, proceed

with your call by pressing the PTT button.

3 A long press of the preprogrammed Monitor

button places the radio in Sticky Permanent

Monitor mode.

• You hear a high-pitched tone.

A short press of the Monitor button cancels

Sticky Permanent Monitor mode and returns

the radio to normal operation.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Sem comentários

Motorola CP040 Guia do Utilizador Página 14