Motorola DCT5100 Guia do Utilizador descarregar pdf (Página 36)

TROUBLESHOOTING

Before calling your service provider, review the troubleshooting guide. This information is to help you quickly solve a problem. If

your problem still exists, contact your service provider.

Problem Cause Possible Solution

No sound Accidentally pressed MUTE on the

remote control.

The stereo is tuned to the wrong

entertainment component.

You are watching TV using your

VCR, and your VCR is off.

Press MUTE on the remote control to restore the volume level.

Check that the stereo is looking at the proper input source.

Turn your VCR on.

No picture Cable signal may not be reaching

your home.

Check to be sure that all cables are connected properly and that

your TV is tuned to the cable channel 3 or 4. Hand-tighten the

cable connections if necessary.

If connected through the baseband RCA video connection, make

sure the cables are connected properly.

If you are watching TV using your VCR, be sure your VCR is on.

1 2 ... 31 32 33 34 35 36 37 38

Sem comentários

Motorola DCT5100 Guia do Utilizador Página 36