Motorola AP-6511 Guia de Instalação descarregar pdf (Página 27)

Defining a Basic AP-6511 Configuration

22. Use the WLAN Setup screen to set the WLAN configurations used on the AP-6511. To add

a new WLAN, select Add WLAN or select an existing WLAN to modify from those listed.

Set the following parameters for the new or modified WLAN configuration:

• SSID - Enter or modify the Services Set Identification (SSID) associated with the WLAN.

The WLAN name is auto-generated using the SSID until changed by the user. The

maximum number of characters is 32. Do not use < > | " & \ ? ,

• WLAN Type - Select either No authentication, no encryption (for an insecure WLAN),

Captive portal authentication, no encryption (for a guest WLAN), PSK authentication,

WPA2 encryption (to implement a pre shared key) or EAP authentication, WPA2

encryption (to implement an external RADIUS server).

• VLAN ID - Use the drop-down menu to select a VLAN for traffic segregation on this

WLAN. All configured VLANs are available.

• WPA Key - Enter an alphanumeric string of 8 to 63 ASCII characters or 64 HEX characters

as the primary string both transmitting and receiving authenticators must share if using

a pre shared key. The alphanumeric string allows character spaces. This passphrase

saves the administrator from entering the 256-bit key each time keys are generated.

23. Select OK to save the changes and exit. Select Next to display the RADIUS

Authentication screen.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 46 47

Sem comentários

Motorola AP-6511 Guia de Instalação Página 27