Motorola MC55N0 Especificações descarregar pdf (Página 24)

1 - 4 MC55A0/MC55N0 Enterprise Digital Assistant Integrator Guide

Installing the Battery

To install the battery.

1. Insert the battery, bottom first, into the battery compartment in the back of the MC55.

2. Press the battery down into the battery compartment until the battery release latch snaps into place.

Figure 1-5

Inserting the Battery

The MC55 automatically powers up after inserting the battery if the battery has been previously charged.

Charging the Battery

Charging the Main Battery

Before using the MC55 for the first time, charge the main battery until the amber Charging/Battery Status LED

remains lit (see Table 1-1 on page 1-5 for charge status indications). To charge the MC55, use a cable or a

cradle with the appropriate power supply. For information about the accessories available for the MC55, see

Chapter 2, Accessories.

For cable and cradle setup and charging procedures see Chapter 2, Accessories for more information.

•

USB Charging Cable

•

Charge Only Cable

•

Single Slot USB Cradle

•

Four Slot Charge Only Cradle

NOTE The MC55 ships with either a 2400 mAh or 3600 mAh battery. The 2400 mAh battery is shown in this

installation procedure.

Battery

Battery Release Latch

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page

6-2.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 125 126

Sem comentários

Motorola MC55N0 Especificações Página 24