Motorola 7545MBWM Guia do Utilizador descarregar pdf (Página 177)

Accessories 4 - 19

The Omnii vehicle cradles are highly ruggedized, single station docks. Although they provide quick insertion

and removal, the cradles hold the Omnii securely even when operated in high vibration environments (such as

vehicles not equipped with suspensions).

The Omnii vehicle cradle is available in two models:

• Model ST1000 - Unpowered cradle.

• Model ST1002 - Powered cradle with communications port. A DE9M serial port (powered) and two USB

Host interfaces.

Figure 4-16

Front and back of ST1002 with Omnii

Motorola also supplies a range of standard mounts for the hand-held vehicle cradles, and the Omnii vehicle

cradles are compatible with all of them.

Vehicle Cradle Mounting Recommendations

Release button

Mounting holes

Power/Communications port

WARNING Before mounting a vehicle cradle in a vehicle, there are a number of oper-

ator safety issues that require careful attention. An improperly mounted

cradle may result in one or more of the following: operator injury, opera-

tor visibility obstruction, operator distraction and/or poor ease of egress

for the operator. Motorola strongly recommends that you seek profes-

sional mounting advice from the vehicle manufacturer.

Ensure that you read the ST1002 Vehicle Cradle Installation Instructions

document (PN 1020305), enclosed with the ST1002, for important safety

information on connecting fuses.

Cable routing within a vehicle cab also requires careful consideration,

especially for devices with loose cables. If you are unable to obtain suita-

ble advice, contact Motorola for assistance. Note also that for better

protection, the equipment should be mounted inside the vehicle roll cage.

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 305 306

Sem comentários

Motorola 7545MBWM Guia do Utilizador Página 177