
Internal Imager & Scanner Specifications D - 15
SE4600LR – Long Range Imager
Parameter Specification
Input Voltages
VCC
VCC_INTFC
VCC_ILLUM
VCC_SENSOR
3.3 V ±10%, 75 mA max
1.8 V ±10% or 3.3 V ±10%, 30 mA max
3.0 V - 8.4 V, 800 mA
3.3 V ±10%, 70 mA max
VCC=VCC_SENSOR=VCC_INTFC =3.3 V VCC_ILLUM=5.0 V
Operating Mode Supply
Currents (Average)
Low Power
Idle
Aim enabled, no illumina-
tion or image acquisition
Image Acquisition
Illumination Enabled
Illumination and Aim
Enabled
Low Power
750 µA
750 µA
20 mA
70 mA
80 mA
550 mA
600 mA
Maximum Sensor Power
Supply Noise*
(VCC_SENSOR)
40 mV p-p (10 Hz - 50 KHz) and
100 mV p-p (50KHz - 100 KHz) for bar code decoding
30 mV p-p (10 Hz - 100 KHz) for image capture
Optical Resolution Near sensor: 5 mil (Code 39), 10 mil (Data Matrix)
Far sensor: 15 mil (Code 39), 35 mil (Data Matrix)
Specular Dead Zone:
Illumination On
Illumination Off
Up to 20º depending on target distance and substrate glossiness
None
Skew Tolerance ± 60º
Pitch Angle ± 60º
Roll 360º
Ambient Light Immunity
(Sunlight)
9000 ft. candles (96,900 lux)
Imaging Sensor:
Image Resolution
Grey Scale
Field of View (FOV)
752 H x 480 V pixels (wide VGA)
256 levels (8 bits per pixel)
SE4600LR Far System: 11.6º horizontal, 7.4º vertical
SE4600LR Near System: 13º horizontal, 8.3º vertical
Comentários a estes Manuais