Motorola SG4-DRT-2X Instruções de Operação Página 70
- Página / 108
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
3-42 Bench Setup and Operation
SG4000 Installation and Operation Manual
CAUTION!
Voltages up to 90 VAC are accessible. To avoid shock hazard, confirm that no power is applied to the node before
removing cover or replacing fuses.
Table 3-3 identifies and describes the SG4 fuses and powering options.
Table 3-3
SG4 fuses and powering options
Fuse
Location
Function Rating Type
Port 1
Passes AC to/from Port 1 of the housing base. 20 A,
32 VDC
Plug-in, fast blow, mini-auto
Port 2
Passes AC to/from Port 2 of the housing base. 20 A,
32 VDC
Plug-in, fast blow, mini-auto
Port 3
Passes AC to/from Port 3 of the housing base. 20 A,
32 VDC
Plug-in, fast blow, mini-auto
Port 4
Passes AC to/from Port 4 of the housing base. 20 A,
32 VDC
Plug-in, fast blow, mini-auto
Port 5
Passes AC to/from Port 5 of the housing base. 20 A,
32 VDC
Plug-in, fast blow, mini-auto
Port 6
Passes AC to/from Port 6 of the housing base. 20 A,
32 VDC
Plug-in, fast blow, mini-auto
Shunt F1
Installed — passes AC power from the left to the right side
of the node. Removed — isolates the right and left halves
so you can loop a different AC source through the side of
the node that is not powered.
30 A,
32 VDC
Plug-in, fast blow, mini-auto
F2
Passes AC power from Port 5 to the rest of the node and
must be in place to power the node from the right side.
20 A,
32 VDC
Plug-in, fast blow, mini-auto
F3
Passes AC power from Port 2 to the rest of the node and
must be in place to power the node from the left side.
20 A,
32 VDC
Plug-in, fast blow, mini-auto
FTEC
Provides an over voltage clamp to ground. 230 V FTEC
Jumper J8
Determines whether AC power is supplied from the left or
right side of the node.
N/A Jumper
Lid router
board
Protects the +5 V supply.
1 A,
32 VDC
Plug-in, fast blow, mini-auto
- Installation and 1
- Operation Manual 1
- FDA Compliance 3
- Contents 4
- Modules 5
- Installation 6
- Figures 6
- Contents v 8
- Introduction 10
- Figure 1-2 11
- SG4000 – open 11
- Using this Manual 12
- Related Documentation 12
- Document Conventions 13
- If You Need Help 13
- Calling for Repairs 14
- Overview 15
- Housing 16
- Figure 2-3 17
- Housing port locations 17
- Gaskets 18
- Weather gasket 18
- (silicone rubber) 18
- RF gasket 18
- (woven wire) 18
- Network Monitoring 19
- Options and Accessories 19
- Electronics Package 20
- Figure 2-5 21
- Figure 2-6 22
- Configuration 23
- Bandpass Frequency 24
- Station Slope 24
- Bandpass Frequency Splits 25
- Level Control 26
- Port Entry 27
- Figure 2-10 28
- Bench Setup and Operation 29
- Figure 3-2 30
- Forward Path Configuration 31
- Forward Split 33
- Loss = 8.7 dB 34
- Forward Redundant Split 36
- PRI) and secondary (SEC) 38
- SW1 AUTO position 39
- Forward Segmented 2X 40
- Figure 3-14 43
- SEC RX PRI RX 44
- SW2 AUTO position 46
- Forward Segmented 4X 47
- Loss = 2.7 dB 48
- Return Path Configuration 50
- Combined Return 52
- Loss = 0.9 dB 53
- Combined Redundant Return 55
- Split Return 58
- Split Redundant Return 61
- Segmented Return 64
- Power Distribution Board 67
- Figure 3-37 68
- Power distribution board 68
- Figure 3-38 69
- SG4000 – fuse locations 69
- of the housing base. 20 A 70
- Power Supply Operation 71
- Ensure shunt F1 (30 A): 72
- 4-2 Modules 74
- SG4-R/* Optical Receiver 75
- 4-4 Modules 76
- 4-6 Modules 78
- Figure 4-4 79
- Figure 4-5 79
- SG4-* transmitter 79
- SG4-IFPT Optical Transmitter 80
- SG4-DFBT Optical Transmitter 81
- SG4000 RF Module 82
- Modules 4-11 83
- FSB Board 84
- SG4-PS Power Supply 85
- Adding Power Supply Modules 86
- Embedded Plug-in Module 87
- 4-16 Modules 88
- RF port 1 88
- RF port 6 88
- Ingress Control 89
- Status Monitoring 89
- Parameter 90
- Fiber Cables 92
- Figure 5-3 93
- Fiber management tray 93
- Figure 5-2 93
- 5-4 Installation 94
- Clamps Clamp 95
- 5-6 Installation 96
- Pedestal Mounting 97
- Grounding the SG4000 98
- Coaxial Cable Installation 99
- Closing the Housing 100
- Specifications 101
- A-2 Specifications 102
- Specifications A-3 103
- A-4 Specifications 104
- Torque Specifications 105
- Abbreviations and Acronyms 106
- Abbreviations and Acronyms-2 107
- 529086-001 108
- Visit our website at: 108
Manuais e produtos relacionados com Processadores Motorola SG4-DRT-2X
Processadores Motorola MVME1X7P Manual de Serviço
(108 páginas)
(108 páginas)
Processadores Motorola MVME712-13 Manual de Serviço
(78 páginas)
(78 páginas)
Processadores Motorola MVME197DP Guia de Instalação
(102 páginas)
(102 páginas)
Processadores Motorola MVME2400 Series Manual de Serviço
(354 páginas)
(354 páginas)
Processadores Motorola DSP56305 Manual do Utilizador
(112 páginas)
(112 páginas)
Processadores Motorola MC68306 Manual do Utilizador
(93 páginas)
(93 páginas)
Processadores Motorola CPU32 Manual do Utilizador
(646 páginas)
(646 páginas)
Processadores Motorola MVME712-12 Manual de Serviço
(210 páginas)
(210 páginas)
Processadores Motorola MVME2400 Series Manual de Serviço
(178 páginas)
(178 páginas)
Processadores Motorola DSP56305 Manual do Utilizador
(47 páginas)
(47 páginas)
Processadores Motorola MC68328 Informações Técnicas
(44 páginas)
(44 páginas)
Processadores Motorola MC68328 Manual do Utilizador
(198 páginas)
(198 páginas)
Processadores Motorola SG2-DRT-3X Especificações
(16 páginas)
(16 páginas)
Processadores Motorola MC68340 Manual do Utilizador
(57 páginas)
(57 páginas)
Processadores Motorola MC68306 Guia do Utilizador
(89 páginas)
(89 páginas)
Processadores Motorola DSP56800 Especificações
(28 páginas)
(28 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.097 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais