Motorola SG4-DRT-2X Instruções de Operação descarregar pdf (Página 97)

Installation 5-7

SG4000 Installation and Operation Manual

Figure 5-7 illustrates the optional strand bracket installed on an SG4000.

Figure 5-7

Optional strand bracket – installed

Pedestal Mounting

To mount the SG4000 in a pedestal or surface installation:

1 Remove the two 5/16 × 18 bolts and associated strand clamps from the top of the node

housing base.

2 Install the two bolts through the mounting brackets (not supplied) and into the two

threaded holes (Figure 5-8) on the horizontal center-line on the rear of the housing base and

torque to 10–12 ft-lbs.

3 Mount the brackets to the pedestal or surface installation and secure with appropriate

hardware.

4 Re-install any modules and electronic components that were removed before the housing

was installed.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 107 108

Sem comentários

Motorola SG4-DRT-2X Instruções de Operação Página 97